How do you reset Shure ULX?

Turn on the transmitter. Hold SET button for 10 seconds. Release SET button when display changes.

How do I sync Shure ulxd2?

1. Perform a group scan on the receiver: SCAN > GROUP SCAN .
2. Press SCAN.
3. When the scan is done, the receiver displays the group with the most available frequencies.
4. Power on the ULXD transmitter.
5. Press the sync button on the receiver.
6. Align the IR windows until the receiver IR port turns red.

How do you unlock Shure ulxd4?

ULX SERIES Transmitter Frequency Unlock: With transmitter OFF, hold down the SET button, then turn transmitter on. “Fr UL” will appear indicating the frequency is unlocked.

Can QLX D operate in high density mode?

High-Density Mode allows ULX-D to use up to 47 channels in a 6 MHz TV channel in the US. In Europe, it can use up to 63 channels in an 8 MHz TV channel when in High-Density Mode.

How do I change group and channel on Shure ULX?

Press the or buttons (ULXS4) or rotate the control knob (ULXP4) clockwise one quarter turn. The next open Channel number will appear on the display, as shown in Figure 10. NOTE: If “NO” appears on the display, the receiver has not detected an open Channel in the current Group.

Does QLXD have Dante?

QLX-D only allows you to control devices within the same network. Also, ULX-D offers dual and quad receivers with audio summing, Dante™ digital audio networking, and dual Ethernet ports. QLX-D doesn’t have those advanced features.

What is Shure ULX-D?

A breakthrough in wireless audio quality, Shure digital processing enables ULX-D to deliver the purest reproduction of source material ever available in a wireless system, with a wide selection of trusted Shure microphones to choose from.

How do I Manage my ULX-D signals?

Selectable Dante networking modes route port signals for flexible network set up. You can remotely manage and monitor your ULX-D receivers using Wireless Workbench and monitor digital audio routing using the Dante Controller. Signals for AMX and Crestron controllers are carried on the same network as Shure Control.

What is ULX-D™ digital wireless?

Shure ULX-D™ Digital Wireless offers uncompromising 24-bit audio quality and RF performance, with intelligent, encryption-enabled hardware, flexible receiver options, and advanced rechargeability options for professional sound reinforcement.

What type of DC power does the ULX receiver provide?

The antenna connectors on the ULX receiver provide 12 V DC for active circuit antennas. Caution: Use only Shure antenna accessories to ensure the best operation. Do not use splitters, combiners, or antennas that provide a DC ground, as this can cause the receiver to function improperly.